ARRI 535B - Manual (Page 11)

11
3.2.4 Inserter/Antiflicker Module
The compact inserter/antiflicker module, which is mounted
on top of the ARRIFLEX 535B’s electronic cover, holds the
video camera electronic, an anti flicker processor and the
entire inserter. All electronic control elements, as well as
all in- and outputs are located here.
The inserter/antiflicker module is available in two versions
for PAL or NTSC.
Note: It is necessary to keep the combination of CCD
optic module and inserter/antiflicker module
together as delivered. Mixing the modules might
lead to reduced image quality.
3.2.5 RS cable
The RS cable supplies the IVS with power and information
regarding the camera speed and shutter mirror position.
It plugs into the ARRIFLEX 535B RS connector and the
inserter/antiflicker module. Please observe the color coding.
3.2.6 Data cable ZV4
Note: Sending data to the film camera through the
IVS is only possible when the IVS is switched on.
The data cable ZV4 is necessary to send additional
information such as time code and RS 232 data to the
IVS. This cable is necessary if time code is in use or if
accessories such as the Laptop Camera Controller need
access to the data interface of the IVS and the camera.
If neither time code is used nor data is sent via the serial
interface, it is possible to work without the data cable ZV4.
General Description