ARRI 535B - Manual (Page 25)

25
attachment screw
connector
screw ring
• Insert the CCD optic module into the video tap of the
film camera with the lens first. Make sure the connector
is pointing to the left side. Push the CCD optic module
into the camera as far as it will go. Twist the module a
little left and right until the key of the lens gear finds its
path and insert the module further into the camera.
Tighten the screw ring a little but do not close it
entirely.
• Place the Inserter/Antiflicker module on the film camera
and connect it to the CCD optic module. Insert the
attachment screw
§ into the camera handle
without closing it and push the Inserter/Antiflicker
module as far to the right as possible. Close the
attachment screw on the camera handle.
• Secure the CCD optic module by closing the screw ring
§ clockwise.
• Connect the RS-cable § between the inserter/anti-
Setup