ARRI 535B - Manual (Page 47)

47
SUB MENU
FORMAT 1
> POSITION<> E
EDGE 1
WHITE
LEVEL 3
OUTSIDE FULL
EXIT
> >
6.3.2 Position - Positioning of the
Format Markings
The format markings can be adapted to every different
format. The format markings on the ground glass serve as
a reference.
To align the electronic format markings with the ground
glass markings proceed as follows:
• Point the film camera towards a bright object so that
the format markings on the ground glass are clearly
visible.
• Move the cursor > with the keys ß and ü to the line
POSITION. Call the positioning mode with the
keys ä or ö. The sub menu is displayed on the
screen
§ .
The symbol indicates that it is now possible to move
the left and the upper line of format 1.
The keys ä or ö move the vertical line right or left,
the keys ß or ü move the horizontal line up and down.
• When the correct position has been set, confirm by
pressing the key E
NTER LNSERT
briefly.
The symbol will now change from to . It is now
possible to set the lower and right line with the keys
Я, ь, д or ö.
• When the correct position has been set, confirm by
pressing the key E
NTER
I
NSERT
briefly.
If both format markings are activated, the symbol
is now displayed. In this case the left and upper line of
format 2 can be set. Proceed as described above.
Inser
ter Facilities