ARRI 535B - Manual (Page 61)

61
T.V. SAFE / TRANSMITTED
SUB MENU
> TC TIME ON
POSITION
SIZE SMALL
BACK-
GROUND BOXED
FRAME
COUNTER FILM
EXIT
11:24:30/03
11:24:30/03
6.5 Time Code Menu
For all TC- and related functions, the ARRIFLEX
535B must be equipped with the data cable ZV4
and the IVS must be in flicker free mode.
The IVS can insert the film camera´s time code into the
video assist image to create a direct link to post production.
It is possible to insert time code, which is related to the
film camera speed, e.g. 24 fps or a time code which
counts according to the type of video assist (25 full video
frames per second with PAL or 30 full video frames per
second with NTSC).
Like all man-readable information, the data is inserted as
a window on the monitor image. The window can be
switched on and off independently. Background, position
and character format can be altered without affecting the
settings of other windows.
The adjustment of the white level of the inserted data, an
inverse display and a fine adjustment of the vertical
position are described in chapter 6.9
This additional line shows the TC information:
Note: The frame information (the last two digits of the
time code display) is only active if time code is
actually recorded on film. If there is no time code
recording on film because for example the camera
is not running on a time code speed, only the
symbol ** is displayed in that position.
• Enter the TIME CODE Menu from the Main Menu.
All settings are immediately activated by
changing them.
Check all settings on the connected monitor.
Inser
ter Facilities