EZ Dupe Gold Series 1 Copy DVD/CD Duplicator - Featuring 24x Drives - Manual (Page 11)

10
7.1.3 System Info: Checks the model number, buffer memory and firmware version
of the duplicator.
 Press ENT
7.2 Erase Disc
7.2.1 Quick Erase: Performs a quick erase of rewritable (RW) media for next use.
Note: Do NOT perform this function on recordable (R) media.
 Insert re-
writable discs and
press ENT
 Finish
Quick Erase
and eject
discs
Note: If the display shows “O” “o” blinking, Erasing is in progress. If the display shows “F” “f” blinking,
DVD+RW Disc Formatting is in progress.
7.2.2 Full Erase: Performs a full erase and format of rewritable (RW) media for next
use.
Note: Do NOT perform this function with recordable (R) media.
 Insert re-writable disc
and press ENT
 Finish Full Erase
and eject discs
Note: If the display shows “O” “o” blinking, Erasing is in progress. If the display shows “F” “f” blinking,
DVD+RW Disc Formatting is in progress.
7.3 Prescan
7.3.1 Prescan: Prescans the master disc and verifies the integrity and quality of the
master disc.
a. Select Utility and press ENT to enter the sub-menu.
b. Select 1. Pre-scan and press ENT

Press
ENT


Finish
Prescan

7.4 Track Edit
7.4.1 Copy Track: Allows the selection of individual track(s) from the master CD and
copies the selected track(s) onto all target discs.
7.4.2 Close Disc: Closes the target discs when all of the track(s) are burned on to all
target discs. Note: The copied disc(s) will NOT play back without this step. Do
NOT skip this step.
7.4.3 Disc Info: Checks the capacity and space used on the disc(s) inside of the
drive(s) of the duplicator.
 Press ENT 