EZ Dupe Gold Series 1 Copy DVD/CD Duplicator - Featuring 24x Drives - Manual (Page 9)

8
To start the Copy & Compare process:
1. Power on the machine (if not already on).
2. Eject disc tray of the Source Drive and place the master disc in the designated
Source Drive (usually the top). The “master disc” is the original of which
copies are made.
3. Eject disc tray(s) of the Writer Drives and place blank disc(s) on the
tray(s). Number of drives used depends on number of copies desired. It is
not necessary to always use all drives.
4. Use the scroll buttons to select the “4. Copy & Compare” command and
press the ENT button. The drives will automatically close trays and begin
the copy process.
5. Once the copy process is complete, the tray(s) will open briefly, and then
automatically close again to begin the compare process.
6. Once the compare process is completed, the trays will automatically eject discs that
have passed the Copy & Compare process.
5. Set Burn Speed – This feature allows you to set the burn speed of various types of disc:
general CDs (data and VCDs), audio CDs, DVDs and dual-layer DVDs (DVD DL).
Selectable burn speeds:
CD: 1, 2, 4, 8, 10, 12, 16, 20, 24, 32, 36, 40 (default), 44, 48, 50, 52, 56 MAX.
Audio CD: 1, 2, 4, 8, 10, 12, 16, 20, 24 (default), 32, 36, 40, 44, 48, 50, 52, 56 MAX.
DVD: 1, 2, 2.4, 4, 6, 8 (default), 12, 16, 18, 20, 22, 24, MAX.
DVD DL: 1.2 (default), 2.4, 4, 6, 8, 12, 16, 18, 20, 22, 24, MAX.
BD: 1, 2 (default), 4, 6, 8, MAX.
To Set the Burn Speed:
1. Power on the machine (if not already on)
2. Use the Scroll buttons to select “5. Set Burn Speed”. Press the ENT button.
3. The first speed selection is for general CDs. Use the Scroll buttons to select the
desired burn speed and press the ENT button.
4. The second speed selection is for audio CDs. Use the Scroll buttons to select the
desired burn speed and press the ENT button.
5. The third speed selection is for DVDs. Use the Scroll buttons to select the desired
burn speed and press the ENT button. Note: The selection is only available on DVD duplicators.
6. The last speed selection is for DVD DL. Use the Scroll buttons to select the desired
burn speed and press the ENT button. Note: The selection is only available on DVD duplicators.
 Press ENT to
load disc 
 Analyzing
source disc 
  Start copying 

Copy completed
and start Compare 
 Finish and eject
discs
 Press ENT &
 or  
  or  and press
ENT to set general
data CD burning speed
