EZ Dupe Gold Series 1 Copy DVD/CD Duplicator - Featuring 24x Drives - Manual (Page 18)

17

 Press
ENT to
confirm 
There are 8 characters for each image name. No empty space allowed in the
image file name. Press ESC to cancel the process.
9.6 Delete Image: Deletes the image(s) from the HDD and reclaims the space occupied
by the image on the HDD.
 Press
ENT 
 Select the image file
to be deleted 
 Press
ENT 
 Delete Image
completed. Repeat to
delete more images.
9.7 Show HDD Info: Shows the amount of used and free images available on the HDD in
both CD and DVD formats.
 Press
ENT 
9.8 Format HDD: Deletes and formats all image(s) on the HDD, restores the HDD to
factory defaults and initializes the HDD for use with the duplicator.
 Press ENT

 Press ENT to
confirm format 

 Press ENT again
to confirm and start
formatting 
Basic Troubleshooting:
Follow these simple steps for quick and proper troubleshooting.
1. Power does not turn on or unit receives no power.
a. Check power cord and outlet to make sure power connections are secured.
b. Check voltage switch on the back of the duplicator to make sure power supply
is set for correct outlet rating.
c. Test with another power cord (same as a PC power cord) to eliminate cable
failure.
2. Master disc cannot be read
a. Change the master disc. The master disc may be of poor quality or with error(s)
that can make duplication difficult or impossible.