EZ Dupe Gold Series 1 Copy DVD/CD Duplicator - Featuring 24x Drives - Manual (Page 4)

3
Menu Overview:
Below is a quick reference chart of the functions available on SATA DVD/CD Duplicators.
Power on the system to access the menu functions below..
1 COPY Copies the master DVD/CD disc. All contents of the master disc
will be duplicated on to all target disc(s) simultaneously.
2
TEST Simulates the copy process, but no data is recorded onto the blank
disc(s).
Note: Test mode can only be done with DVD-R and CD-R media
only.
3 COMPARE Performs a bit-for-bit comparison between the master disc and
copied disc(s).
4 COPY & COMPARE Copies the master DVD/CD disc and then immediately follows
the copy process with a bit-for-bit comparison between the master
disc and copied disc(s) to ensure exact duplication.
Note: The “Compare” function cannot be used with audio CDs.
5 SET BURN SPEED Allows the speed settings to be changed for various formats.
6 SELECT SOURCE Allows the source drive to be changed to any of the available
drives in the duplicator, including the Hard Disk Drive (HDD).
7 UTILITY
7.1 INFORMATION
7.1.1 Disc Info. Displays basic information of the discs inserted, such as disc type,
amount of data on disc for master disc(s) (in MB) and media book
type. For blank media, displays the media book type, available
space and speed of the media.
7.1.2 Drive Info. Displays information of all drives in the duplicator including the
Reader, HDD (if present) and Writer drive(s).
7.1.3 System Info. Displays the duplicator information, such as the hardware version,
buffer memory and currently loaded firmware.
7.2 ERASE DISC
7.2.1 Quick Erase Erases all rewritable media (CD-RW, DVD+/-RW, DVD+/-RW DL,
BD-RW).
7.2.2 Full Erase Formats all rewritable media (CD-RW, DVD+/-RW, DVD+/-RW DL
BD-RW,).
7.3 PRESCAN
7.3.1 Pre-scan Performs a scan on the master disc before the copy process starts
and ensures the master disc can be copied in the duplicator.
7.4 TRACK EDIT Allows for the selection of individual track(s) from different master
audio CDs to create custom compilation.
7.4.1 Copy Track Allows the selection of individual track(s) from the master CD and
copies the selected track(s) onto all target discs.