EZ Dupe Gold Series 1 Copy DVD/CD Duplicator - Featuring 24x Drives User Manual
Page 5
4
7.4.2. Close Disc
Closes the target discs when all of the track(s) are burned on to all
target discs.
Note: The copied disc(s) will NOT play back without
this step. Do NOT skip this step.
7.4.3 Disc Info
Displays the information regarding the track(s) on the disc(s) and
how much space is remaining on the target disc(s).
7.5 EJECT ALL DISC
Allows the duplicator to eject disc.
7.6 COPY COUNTER
Counts the number of successful and failed copies of DVD/CD
discs made by the duplicator.
7.6.1 Show Counter
Show the number of successful and failed copies of DVD/CD
discs
7.6.2 Enable Counter
Set Enable or Disable the Copy Counter.
7.6.3 Clear Counter
To reset the Copy Counter.
7.7 Update Bios
Allows for update or rollback of the duplicator firmware.
8 SETUP
8.1 Auto Start Time
Sets auto start time from OFF (no auto start) to 99 sec. Allows the
duplicator to automatically start one of six following functions once
the master disc and desired number of target disc(s) are inserted
and the drive trays are closed: Copy, Test, Copy & Verify, Copy &
Compare, Verify and Compare.
8.2 Display Mode
Sets the amount of information displayed on the LCD during the
performance
of various functions.
8.2.1 Basic
Basic Information Displays.
8.2.2 Show Timer
Enables or disables the copy time to be displayed when the copy
process is finished.
8.2.3 Show Speed
Displays the speed at which discs are read and writing during
various processes.
8.3 Button Beep
ON or OFF Beeping sound.
8.4 Eject on Start
Eject all trays after the booting sequence complete.
8.4.1 Eject All Discs
Eject all trays with disc inside.
8.4.2 Do Not Eject
Do not eject any disc.
8.4.3 Eject target Only Eject writer drive only.
8.4.4 Eject Source Only Eject reader drive only.
8.4.5 Eject All Trays
Eject all drives.
8.5 Reader Speed
Sets the speed at which discs are read during various processes.
8.6 Compare Speed
Sets the speed at which the compare process is executed.
8.7 Language
Allows different language selections for LCD display.
8.8 Clear Setup
Clears the CMOS and resets the duplicator back to factory
defaults.