Kramer Electronics VP-729 - Manual (Page 10)

VP-729 – Overview 5
In addition, the VP-729:
• Includes non-volatile memory that retains the last settings, after switching the
power off and then on again
• Digitally reprocesses the signal to correct mastering errors and regenerates
the video at a higher line and pixel rate format, providing native-resolution
video for LCD, DLP and plasma displays
• Is specifically designed to improve video quality by reducing chroma noise
• Scales and zooms (to up to 400% of the original size)
• Can provide non-linear scaling for 4:3 and 16:9 transformation
Control your VP-729 directly via the front panel push buttons, or:
• By RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
• Remotely, from the infrared remote control transmitter (with on-screen menus)
• Via the Ethernet
The VP-729 is housed in a 19” 1U rack mountable enclosure, with rack “ears”
included and is fed from a 100-240 VAC universal switching power supply.
3.1
13B
Defining the VP-729 Presentation Switcher/Scaler
This section defines the VP-729.