Kramer Electronics VP-729 User Manual
Page 12
VP
-72
9 –
O
ver
vi
ew
7
Figure 2: VP-729 Presentation Switcher/Scaler Rear Panel
#
Feature
Function
21
UNIV. IN RCA
Connectors (from 1 to 4)
Y/CV
Connects to the video acceptor which can be either composite video (Y/CV), s-Video (Y/CV,
Pb/C ) or component video (Y/CV, Pb/C, Pr)
22
Pb/C
23
Pr
24
UXGA 1 IN 15-pin HD Connector
Connects to the UXGA (analog interface) graphics source 1
25
UXGA 2 IN 15-pin HD Connector
Connects to the UXGA (analog interface) graphics source 2
26
AUDIO IN UNIV. IN
RCA Connectors (from 1
to 4)
L/S/PDIF
Connects to the left unbalanced stereo analog audio source.
Alternatively, connect to a digital audio source
27
R
Connects to the right unbalanced stereo analog audio source
28
AUDIO IN 3.5
Mini Jack
UXGA 1
Connects to the unbalanced stereo analog audio source 1
29
UXGA 2
Connects to the unbalanced stereo analog audio source 2
30
AUDIO OUT
RCA
Connectors
L
Connects to the left channel of the unbalanced stereo analog audio acceptor
31
R
Connects to the right channel of the unbalanced stereo analog audio acceptor
32
S/PDIF
Connects to a digital audio acceptor
33
AUDIO PROG
Program Button
Push to upgrade to the latest Kramer audio firmware.
Release for normal operation
34
Terminal Block Connector
Connects to a PC for audio firmware upgrade
35
HDMI 1 IN Connector
Connects to the HDMI 1 source
36
HDMI 2 IN Connector
Connects to the HDMI 2 source
37
HDMI OUT Connector
Connects to the HDMI acceptor
38
UXGA OUT 15-pin HD Connector
Connects to the video acceptor that displays the scaled output.
In the default HDTV mode, the signal is transmitted via 3 pins: PIN 1 is Pr, PIN 2 is Y, PIN 3 Pb
39
ETHERNET Port
Connects to your LAN
Local Area Network – that is computers sharing a common communications line or wireless link,
which often share a server within a defined geographic area
40
RS-232 9-pin D-sub Connector
Connects to a PC or serial controller
41
Power Connector with Fuse
AC connector for connecting power to the unit