Kramer Electronics VP-729 - Manual (Page 11)

Figure 1: VP-729 Presentation Switcher/Scaler Front Panel
# Feature Function
1 POWER Switch Illuminated switch for turning the machine ON or OFF
2 IR Receiver / LED Lights red when the unit accepts IR remote commands
3 UNIVERSAL INPUT Selector Buttons Press to select the composite video / s-Video / component video source and the appropriate audio source (from 1 to 4)
4
INPUT Selector
Buttons
(illuminates when
selected)
UXGA 1 Press to select the UXGA source 1 and the appropriate audio source
5 UXGA 2 Press to select the UXGA source 2 and the appropriate audio source
6 HDMI 1 Press to select the HDMI source 1
7 HDMI 2 Press to select the HDMI source 2
8 USB Press to select the USB source (JPEG files on a USB memory stick) and also run/stop the slideshow (see Section 7.7.1 )
9 PIP Button Toggles the picture-in-picture function (see Section 6.2 )
10 BLANK Button Press to toggle between a blank screen (blue or black) and the display.
The BLANK button can be programmed to mute the audio signal at the same time (see Page 32 )
11 FREEZE Button Press to freeze/unfreeze the output video image, as well as pause the slideshow (see Page 29 ).
The FREEZE button can be programmed to mute the audio signal at the same time (see Page 32 )
12 MENU Button Press to display the OSD menu screen. Press again to return to normal operation.
13 ENTER Button Press to move to the next level in the OSD screen or to accept a new parameter
14 Navigation Buttons
Button
Decreases the range by one step in the OSD screen or moves to the previous level in the OSD screen.
Decreases the volume level, when not in the OSD menu
15
Button
Moves up one step (in the same level) in the OSD screen, or moves to the previous slide when running a slideshow (see
Section 7.7.1 )
16
Button
Increases the range by one step in the OSD screen
Increases the volume level, when not in the OSD menu
17
Button
Moves down one step (in the same level) in the OSD screen, or moves to the next slide when running a slideshow (see
Section 7.7.1 )
18 RESET TO XGA/720p Button Press and hold to reset to the default resolution (toggles between RESET TO XGA and 720p)
19 PANEL LOCK Button Press to lock/unlock the front panel to prevent unintentional operation
20 USB Connector Connects to a USB drive to read JPEG files (smaller than 1MB and up to a resolution of 2048x1536) and also to download
new firmware
6
VP
-72
9 –
O
ver
vi
ew