Kramer Electronics VP-729 - Manual (Page 25)

20 VP-729 - Configuring the VP-729 via the OSD MENU Screens
7.1 The Input Screen
Figure 10: Input Screen
Setting Function Default
Source Select the source: Input 1, Input 2, Input 3, Input
4, VGA 1, VGA 2, HDMI 1, HDMI 2 or USB
When switching sources, the image fades through
black
The source is automatically updated when
pressing an input front panel button on the
machine
Input (1 to 4) Source
Type
Select the source type: Component, YC or video
(CV)
Video
Image Name Select the file name of the image displayed when
the USB port is selected as an input
This feature is available when the slideshow
feature is set to Off (see Section 7.7.1 )
This feature supports JPEG format only. The
JPEG file should be smaller than 1MB and should
not exceed a resolution of 2048x1536.
If the image file is not within the definition, the
machine displays the message: “Size Too Big”
Color Format Select the color format: Auto, RGB or YUV Auto
Video Standard Select the video standard: Auto, NTSC, PAL,
PAL-M, PAL-N, NTSC 4.43, SECAM or PAL-60
Auto
H-Position Set the horizontal position according to the input
resolution
For UXGA and component video inputs
V-Position Set the vertical position according to the input
resolution
Frequency Adjust the frequency: 0 to 50
For UXGA inputs
0
Phase Adjust the phase: 0 to 31 0
Auto image Assesses the image and improves the quality
accordingly, by automatically adjusting the phase,
frequency and position