Kramer Electronics VP-729 - Manual (Page 23)

18 VP-729 - Presentation Switcher / Scaler Buttons
6.4 The Infrared Remote Control Transmitter
You can control the VP-729 remotely from the infrared remote control transmitter
which is powered by two AAA size 1.5V DC batteries. The IR remote control
transmitter:
• Has a range of up to 15 meters
• Delivers instantaneous results
Figure 8: IR Remote Control
Transmitter
Key Function
Freeze Pauses the output video and can be
programmed to mute the audio signal at
the same time (see Page 32 )
Blank Toggles between a blank screen (blue or
black) and the display
POWER Cycles power
Main
Source
9 keys for selecting one of the following
sources: Input 1, Input 2, Input 3, Input 4,
VGA 1, VGA2, HDMI 1, HDMI 2, and USB
Reset Press and hold to reset to the default
resolution (toggles between RESET TO
XGA and 720p)
Info Press to toggle the Info OSD menu
Capture Captures an image to place as a logo or
background (see Page 31 )
MENU Shows the main OSD Menu
Navigation
arrows
Allows maneuvering within an OSD
screen (left, right, up and down, as well
as the ENTER arrow at the center).
The + and - buttons increase and decrease
the volume level, respectively (when not in
the OSD menu)
Auto
Image
Press to assess the image and improve
the quality accordingly, by automatically
adjusting the phase, frequency and
position
Save Press to save a profile
Recall Press to recall a profile
Picture Press to display the Picture OSD menu
PIP source 9 keys for selecting one of the following
PIP sources: Input 1, Input 2, Input 3,
Input 4, VGA 1, VGA2, HDMI 1 and
HDMI 2
Mute Press to mute the audio signal
Swap Press to toggle between the PIP content
and the parent screen content
PIP Press to select the picture-in-picture (the
PIP button illuminates) see Page 13
LR-12