Kramer Electronics FC-41 - Manual (Page 12)

FC-41 - Connecting the FC-41 9
Figure 3: Connecting the FC-41 HD-SDI to Component Converter
5.1 Connecting to the FC-41 via RS-232
You can connect to the unit via a crossed RS-232 connection, using for example,
a PC. A crossed cable or null-modem is required as shown in method A and B
respectively. If a shielded cable is used, connect the shield to pin 5.
Method A ( Figure 4 )
—Connect the RS-232 9-pin D-sub port on the unit via a
crossed cable (only pin 2 to pin 3 , pin 3 to pin 2 , and pin 5 to pin 5 need be
connected) to the RS-232 9-pin D-sub port on the PC.
Note: There is no need to connect any other pins.