Kramer Electronics FC-41 - Manual (Page 7)

4 FC-41 - Overview
3 Overview
The Kramer FC-41 is a high performance converter for HD-SDI. It converts an
HD-SDI input signal to component (Y, P B , P R ) and RGB/HV signals.
In addition, the FC-41 features:

Component and SDI outputs on BNC connectors, and an RGBHV output on
a 15-pin HD computer graphics video connector

An SDI input which is reclocked and equalized, and distributed to two HD-
SDI outputs

Output resolution which is the same as that of the input and is compatible
with 720p and 1080i up to 60Hz, as well as 1080p up to 30Hz

ProcAmp controls, with memory for saving and loading 16 setups

A component output with tri-level syncs

A highly accurate color bar generator with eight built-in test patterns

A lockable front panel to prevent unintentional tampering with the unit
The FC-41 converter can be controlled via its front panel with a user-friendly LCD,
and also has an RS- 232 interface. It is housed in a 19” 1U rack mountable
enclosure, and is fed from a 100-240 VAC universal switching power supply.
3.1 Defining the FC-41 HD-SDI to Component Converter
This section defines the FC-41.