WIKA DPT-10 - Manual (Page 81)

-
Double chamber housing l
1 x cable entry M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5; plug M12 x 1 for
the external indicating and adjustment unit
(optional)
or:
l
1 x closing cap ½ NPT, 1 x blind stopper
½ NPT
, plug M12 x 1 for the external indicating
and adjustment unit (optional)
or:
l
1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5; plug M12 x 1 for the
external indicating and adjustment unit (optio-
nal)
Spring-loaded terminals for wire cross-sec-
tion up to 2.5 mm² (AWG 14)
Electromechanical data - version IP 66/IP 68 (1 bar)
Cable entry
-
Single chamber housing l
1 x IP 68 cable gland M20 x 1.5; 1 x blind
stopper M20 x 1.5
or:
l
1 x closing cap ½ NPT, 1 x blind plug ½ NPT
Connection cable
-
Configuration four wires, one suspension cable, one breather
capillary, screen braiding, metal foil, mantle
-
Wire cross-section 0.5 mm² (AWG 20)
-
Wire resistance < 0.036 Ω/m (0.011 Ω/ft)
-
Tensile strength > 1200 N (270 pounds force)
-
Standard length 5 m (16.4 ft)
-
Max. length 1000 m (3281 ft)
-
Min. bending radius at 25 °C/77 °F 25 mm (0.985 in)
-
Diameter approx. 8 mm (0.315 in)
-
Colour - standard PE Black
-
Colour - standard PUR Blue
-
Colour - Ex-version Blue
Electromechanical data - version IP 66/IP 68 with external electronics
Connection cable between IP 68 instrument and external housing:
-
Configuration Four wires, screen braiding, inner cover, screen
braiding, outer cover
-
Wire cross-section 0.5 mm² (AWG 20)
-
Standard length 5 m (16.40 ft)
-
Max. length 25 m (82.02 ft)
Differential pressure transmitter DPT10 - metal measuring diaphragm • Profibus PA 81
11 Supplement
37245
-
EN
-100120