Serial transmission parameters – RADWAG WLC 0,6/A1/C/2 Precision Balance User Manual
Page 30
Advertising
- 30 -
Return to weighing:
see 11.2.2.
14.4. Serial transmission parameters
Procedure:
Enter the submenu
<P2.Prnt> and then:
7d2SnP - 7 data bits; 2 stop bits, no parity control
7d1SEP - 7 data bits; 1 stop bit, EVEN parity control
7d1SoP - 7 data bits; 1 stop bit, ODD parity control
8d1SnP - 8 data bits; 1 stop bit, no parity control
8d2SnP - 8 data bits; 2 stop bits, no parity control
8d1SEP - 8 data bits; 1 stop bit, EVEN parity control
8d1SoP - 8 data bits; 1 stop bit, ODD parity control
Return to weighing:
See 11.2.2.
Advertising
This manual is related to the following products: