RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 62)

- 62 -
Procedure:
 Enter submenu <P6.CAL> and then:
 The following messages are displayed:
 The new start mass is adjusted and returns to the submenu:
 The process of start mass adjustment can be terminated by pressing
, which is signalled on the display:
 Return to weighing with saving changes that have been made.
Caution:
If the start mass adjustment lasts longer than 15 the <Err8> message will
be displayed and short audible signal will be emitted. Press to perform
calibration again with more stable ambient conditions!