RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 58)

- 58 -
 After completion of the calibration process program returns
to weighing mode.
 Calibration process can be terminated anytime by pressing
which is signalled by the following message on the display:
Notice:
1. It should be remembered that internal calibration should
be performed with unloaded pan with keeping possibly
constant ambient conditions.
2. If the calibration process lasts longer than 15 seconds scale
software will react with <Err8> displayed and a short sound
and then the calibration procedure will start again.