Seiwa SW AP03 - Manual (Page 49)

lever the package up so that it remains parallel to the surface of the board until free of the
socket.
Check the new package to ensure that all pins are straight and at right angles to the
package. If they tend to splay outwards, bend them inwards by rocking the package on a
hard smooth surface. Insert the package in the socket, making certain that the small notch at
the end of the package lines up w ith the small notch on the socket.
6.3 WARRANTY
Seiwa corporation Co. Ltd is committed to the principles of product support and customer
satisfaction. It warrants its autopilots and accessories against defective materials and
workmanship for a period of twelve months (six months in the case of commercial
applications) from the date of installation, provided that the total period does not exceed
eighteen months from the date of shipment from Seiwa corporation Co. Ltd.
Parts exhibiting defective material or workmanship w ill be repaired or replaced at our option
without charge to the first owner for the duration of the warranty, provided that they are
returned to our factory at the owner's cost and risk. This warranty does not extend to
components showing corrosion or other water damage which has resulted from water
exposure as a result of incorrect installation or inadequate protection.
Seiwa corporation Co. Ltd shall not be liable for any expenses or for any direct or
consequential damage caused by defects, failure or malfunction of their autopilots or
accessories whether a claim is based on a warranty contract, tort or otherwise.
06/2009
rev. 1.0