Alpine eX-10 - Manual (Page 11)

Tune the car radio to an FM frequency where
there is no radio reception (for example,
104.7).
Save this as a preset; that way the customer
can select the preset station to listen to iPod or
Bluetooth sound from the eX‐10.
Select “Transmitter” from the eX‐10’s “setup”
menu, then press and hold “enter” for two
seconds. Use the >>I and I<< buttons to select the
same frequency that was preset into the car’s
radio (for example 104.7).
Press “enter” to set this frequency as a preset in
the eX‐10.
Installation Instructions
Step 7: Set up the eX‐10 to work correctly
Note: When using “Option #1” (AUX input) skip step 7b
Step 7b: Setting the FM transmitter frequency
Page 11