Alpine eX-10 - Manual (Page 9)

Plug the monitor cable into the
port on the eX‐10’s power supply
marked “monitor”.
Plug the iPod cable into the port
marked “iPod”.
Plug the “eX‐10” output from
the KWE‐155B FM splitter into
the “antenna” port (unless you
are using the “AUX in” option)
Plug the microphone cable into
the “microphone” port.
Screw the yellow end of the
power cord into the port
marked “power supply”.
Mount the eX‐10’s power
supply in a hidden location.
Installation Instructions
Step 6: Connect the eX‐10’s power supply
Page 9