Alpine eX-10 - Manual (Page 12)

Step 7c: Set up your customer’s Bluetooth phone to work with the eX‐10
Tap the “setup” button, and press “enter” to
select “Bluetooth”. Press “enter” again to
select “pairing mode”, and a four‐digit pass
code will be displayed on the eX‐10.
The eX‐10 is now discoverable and ready to
connect to your customer’s Bluetooth phone.
Turn on Bluetooth in the phone’s menu. The phone
will ask for a four‐digit code to connect with the eX‐10,
so enter the code shown on the eX‐10’s screen.
You will now see a “connected” message on your
phone to let you know that you’ve successfully paired
your phone with the eX‐10*
Once this is done, use the >>I button to scroll down to
“HFP Speaker”. Select “External” to have Bluetooth
audio play through the sound system, or “Internal” to
have it play through the eX‐10’s built‐in speaker.
*Note: Turn “Auto Connect” on in the Bluetooth setup menu if you want your phone to automatically connect to your eX‐10 whenever you turn
on your car’s ignition.
Now we’re all set up, so let’s use the eX‐10>>>
Installation Instructions
Step 7: Set up the eX‐10 to work correctly
Page 12