Installing the rear fan – Lenovo THINKSERVER TD230 User Manual
Page 93
5. The rear fan is attached to the chassis by four rubber mounts. Remove the rear fan by cutting the rubber
mounts and gently pulling the rear fan out of the chassis.
Figure 65. Removing the rear fan
6. If you are instructed to return the removed rear fan to the manufacturer, follow all packaging instructions
and use any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To install the rear fan, see “Installing the rear fan” on page 83.
Installing the rear fan
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and
“Guidelines” on page 21. To obtain a copy of the publications, go to:
This section provides instructions on how to install the rear fan.
Chapter 5
.
Installing, removing, or replacing hardware
83