Avaya 38DHB0002UKDD - Manual (Page 81)

How Do I? Part 1 IP Connectivity - Page 81
Task Description
Step 3
Obtain configuration file for Unit2 and perform the
following tasks:
1. Create a Normal service type
• Name = unit2
• Account name = unit1
• Password = password1
• Encrypted Password = selected
2. Create a User
• Name = unit1
• Password = password2
• On the Dial-In Tab select Dial-In On
3. Create a RAS
• Name = unit1
4. Modify the WAN device and add the following
parameters.
• Speed = as specified
• Mode = SyncPPP
• RAS Name = unit1
Once these tasks are completed successfully
select the newly created User/ Service and
confirm details are as shown below. If not
check spelling of Names/Account Names.
Parameter
Value
Name (Outgoing) unit1
Account Name (Incoming) unit2
Password (Outgoing) password1
Incoming Password password2
Step 4
For both Unit1 and Unit2 add the following
configuration using the PPP tab of the WAN Service.
• Multilink= selected
• IPHC = selected
Selection of the PPP Multilink and IPHC
protocols are mandatory requirements for the
correct operation of the QoS over a WAN link.
The WAN speed must also be accurately
configured (See QoS on page 98.)
INDeX IPNC Cassette Administration Manual How Do I? - Page 81
38DHB0002UKDD – Issue 7 (22/11/02) Part 1 IP Connectivity