Konica Minolta bizhub PRESS C8000e - Manual (Page 112)

Perfect Binding Function Chapter 4: Print Operation (PS Plug-in)
4-18
Cover Print 2 in 1
For the front cover, the first page and the last page (n page) of the originals are made as 2 in
1, and the second page up to the last page but one (n - 1 page) are printed as the body of
documents with no printing made on the spine for perfect binding.
The width you set in the printer driver is reflected to the spine width. The setting can range
between 1 to 30 mm in increments of 0.1 mm.
Ex.: Using [Cover Print 2in1] for the perfect binding
Cover Print 3 in 1
After cutting and pasting automatically the first page of the original on the front cover, the last
page but one (n - 1 page) on the back cover, and the last page (n page) on 3 in 1 as the spine,
the front cover is printed.
And the second page up to the last page but two (n - 2 page) are printed as the body of doc-
uments.
The width you set in the printer driver is reflected to the spine width. The setting can range
between 1 to 30 mm in increments of 0.1 mm.
Ex.: Using [Cover Print 3in1] for the perfect binding
• The use of [PI Tray] and [PB Cover Tray] is not available for [Cover Print 3in1].
Cover Trim
Check it when you cut out the cover of Perfect Binding.
Spine Width
Set the width of a spine.
Cover 2-Sided
Check it when you want to make the cover of Perfect Binding double-sided.
Cover Tray
Select the cover tray.
Cover Size
Set the cover size.
Paper Profile
Set a paper profile.
Cover Print 2in1 (Both sides)
n-
2
Cover Print 3in1 (Both sides)
n-
3