Konica Minolta bizhub PRESS C8000e - Manual (Page 166)

About the network setting (Fiery controller) Chapter 8: Application
8-16
• About the details of settings, refer to the User's Guide provided with Fiery controller.
• To enable the Fiery controller to receive e-mails with attached files, set [Configure] - [Print
via E-mail].
• [Add POP before SMTP] is available when [POP3] is selected from [Incoming mail server]
- [Server type].
• If you don’t want to reboot immediately, click [Cancel] after clicking [Apply]. In this case,
modified settings are saved and will be available after the next restart of the controller.
17.
If you accept automatically all certificates, select [Accept
all SSL certificates] check box.
18.
To [Timeout], specify the timeout value which the controller
stops attempting to connect with the mail server.
19.
To [Administrator Email Address], enter the E-mail address
of the administrator.
20.
Click [Save].
21.
Click [Apply].
22.
Set the other settings as required and click [Reboot].