Konica Minolta bizhub PRESS C8000e User Manual
Page 155
Chapter 8: Application
Command WorkStation
8-5
1
2
3
4
5
7
8
10
6
Application
7.
Place EFI Spectrometer ES-1000 in the calibration cradle,
then click [Continue].
8.
Load the measurement page on the measurement guide
plate.
9.
Follow the instructions on the measurement screen to mea-
sure color strips in sequence.
•
Place approximately 10 sheets of plain paper beneath the measure-
ment page or use a backer board, before starting measurement.
•
Hold down the measurement button of EFI Spectrometer ES-1000.
After you hear a beep, slide it while holding down the measurement
button.
Slide EFI Spectrometer ES-1000 to the end of strip, then release the
measurement button.
•
For details about how to use EFI Spectrometer ES-1000, refer to the
manual supplied with this machine.
[Next Page]