Smb setting, Smb setting -13 – Konica Minolta bizhub PRESS C8000e User Manual
Page 163
Advertising
Chapter 8: Application
About the network setting (Fiery controller)
8-13
1
2
3
4
5
7
8
10
6
Application
SMB Setting
To enable SMB setting is necessary to use the SMB printing function and the Scan to SMB
function.
• About the details of settings, refer to the User's Guide provided with Fiery controller.
• If you don’t want to reboot immediately, click [Cancel] after clicking [Apply]. In this case,
modified settings are saved and will be available after the next restart of the controller.
• To reflect the modified settings, reboot the Fiery controller.
1.
Start Configure.
2.
Select [Network] - [Services] - [Windows Printing (SMB)].
3.
Click [Enable Windows Printing (SMB)] check box.
4.
Click [Apply].
5.
Set the other settings as required and click [Reboot].
Advertising