Konica Minolta bizhub PRESS C8000e - Manual (Page 186)

Print Position Adjustment Chapter 9: Troubleshooting
9-8
Print Position Adjustment
You can adjust the print position of text and images on a page using the tray alignment function
of Command WorkStation.
Tray Alignment Function
1.
Start Command WorkStation as an Administrator. p. 8-2
2.
Select [Tray Alignment] from [File] menu.
3.
Following the instruction of the wizard, specify [Tray] and
[Paper Size] and print the test page.
4.
Fold the long side of the printed test page to half and enter
the cross point value between the each scale (marked A, B,
and C) and folding.
• Image Controller adjusts small shifts and skewness of the printed
contents with the base of these values.
5.
Print the test page again to confirm the results of the
adjustment.