Kip request operator guide, Of copies, Collate – Konica Minolta KIP C7800 User Manual
Page 28: Cut sheet, Advanced job settings
KIP Request Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 24 -
# of Copies
This field chooses the total number copies from 1 to 999.
Collate
This field allows collated or un-collated prints.
111, 222, 333… or 123, 123, 123…
Cut Sheet
When activated in the Request.ini file this feature allows the user to print
directly to the cut sheet bypass. Only one sheet at a time may be printed and
a
force size setting MUST be selected in order to print.
If a force size setting is not selected the following message will be displayed.
Advanced Job Settings
On the left side of the main Request screen are buttons to allow advanced settings and configuration
of the prints.
These buttons are:
Manage
Pen Configuration
Zoom
Rotation
Stamp
Fold
Header
Mirror
Invert
View
2-Up Printing