Konica Minolta KIP C7800 - Manual (Page 72)

KIP Request Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 68 -
Appendix
Technical description
Fold parameters are assigned similar to Stamp (.STP) files and Pen Table (.PEN) files as explained in the
KIP Job Ticket Integration Information. In the job ticket folder, there is a job sub-folder containing text
files that refer to the .STP, .PEN files for stamping and pen tables, there is now a new file referred to as a
.FLD file that contains fold parameters.
In Stamping a particular image, the job sub-folder must contain files such as 0000.SSP which contains the
name of the .STP file associated with stamping the first image in the job. The content of the .SSP file is
actually the name of the .STP file (also in the job sub-folder) to be used by the Unattend program in
stamping a particular image. Subsequent images are stamped by using 0001.SSP, 0002.SSP to stamp
image number 2 and 3 in the job. The numbering refers to the order of the documents in the .KIP ASCII
Job Ticket. This method is duplicated for setting a fold parameter to work with image number 1, using
0000.FLP, then image 2 using 0001.FLD etc.
Action Actual File Reference File:
Stamp
.STP, default.stp, not for
construction.stp, etc. 0000.SSP, 0001.SSP, 0002. SSP containing a .STP filename to
apply to document 1, 2, 3 as listed in .KIP ASCII Job Ticket.
Pen Table .PEN, default.pen, etc.
0000.PPN, 0001.PPN, 0002.PPN referring to .PEN filename to
apply to document 1, 2, 3 as listed in .KIP ASCII Job Ticket
Fold
.FLD, default.fld,
36x24.fld, etc. 0000.FLP, 0001. FLP, 0002. FLP referring to .FLD filename to
apply to document 1, 2, 3 as listed in .KIP ASCII Job Ticket
.FLD File Contents (sample)
[KipFolderSettings Ver. 1.0]
FolderOriginalOrientation=0
FolderOutputOrientation=1