Konica Minolta KIP C7800 - Manual (Page 9)

KIP Request Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 5 -
6. Click OK to return to the SELECT PRINTERS screen and ensure that the printer is selected with a
check mark.
7. Click OK again to return to Request Screen.
8. The roll information should now be seen in the lower main screen to confirm connection.
Setting up the Request Client to submit to an FTP site
When Request is launched for the first time, it will not be configured to print to any FTP sites or
printers.
1. To add an FTP site to the Request client, click OPTION, FIND KIP PRINTERS. The SELECT KIP PRINTERS
menu will open.
2. (Note: If there are checkboxes available on this menu, Request
has detected one or more KIP Windows drivers installed or
shared to the local PC. Ignore them at this time.)
3. Click ADD A PRINTER TO THIS LIST.
4. The ADD KIP PRINTER menu will open.
5. Click the SET FTP ADDRESS radio button.
6. Set IP Address: Enter the IP Address of the FTP site, which should be supplied on the FTP