Arturia JUPITER-8V 2 - Manual (Page 37)

ARTURIA – JUPITER-8V – USER’S MANUAL 37
Choose the triangle waveform for the α (alpha) angle
4.5.3 Control parameters with the Keyboard unit
The Keyboard unit enables you to control parameters via velocity and aftertouch.
Click on the “MODULATIONS” tab then on the tab called “KEYBOARD” to show the
interface.
Click on the “KEYBOARD” tab
Select the parameter to be controlled by the velocity and then set the amount knob
to your liking.
Choice of the modulation destination, setting its amount
Customize how velocity modifies the selected parameters thanks to a curve. The X
axis represents the amount of velocity while the Y axis represents the amount sent
to the parameters. This curve can be controlled thanks to 3 points.