Arturia JUPITER-8V 2 - Manual (Page 41)

ARTURIA – JUPITER-8V – USER’S MANUAL 41
Activate the button «ON/OFF» of the Chorus
Adjust the “Dry/Wet” knob of the Chorus in a manner that is balanced between the
original sound and the treated sound.
Next, turn the “Rate” knob of the Chorus to set the speed of the oscillations
affecting pitch.
Finally, set the stereo width of the Chorus by turning the “Spread” knob.
The settings of the chorus
4.7.2 The delay
The Delay is a stereo echo effect that adds space to your sound. It possesses
independent settings for speed and the number of repetitions on the right and left side.
Therefore it is possible to create a big number of rhythmic combinations between the
repetitions. The speed of the Delay can also be synchronized to the MIDI tempo of your
sequencer. Let’s use the “JMB_Bass1” example again and see how to use the effect on
this sound:
Activate the “Delay” button on the tool bar. The effect is activated
Set the “Dry/Wet” knob of the Delay in a manner to balance between the original
and the treated sound
Turn next the 2 knobs “TIME L / TIME R” to set the speed of the repetitions for the
right and left side.
It is also possible to set the number of repetitions (Feedback) for each stereo side
(“Feedbk R” and “Feedbk L”).