Konica Minolta PS5000C User Manual
Page 64
Advertising
PS5000C Operator’s Manual
5-4
Error message
Action
“Failed to read the Na3_kwbsha.dat.”
Perform the Shading adjustment and then the White
Balance adjustment procedures.
“Invalid WB data”
Perform the White Balance adjustment procedure.
(Refer to Chapter 3 “2.3 White Balance adjustment”.)
“Invalid Shading data.”
Perform the Shading adjustment procedure.
(Refer to Chapter 3 “2.2 Shading adjustment”.)
“Cannot find the scanner”
Turn off the power switch of the Scanner, and turn it
on again. Restart the personal computer.
Advertising