Konica Minolta Magicolor 7300 - Manual (Page 106)

Replacing a Print Unit Assembly 98
8
Prepare the new print unit.
9
Remove the new print unit, which is
wrapped in an aluminum pack, and
the print unit disposal bag from the
box.
Check that “Operating Procedure”
appears on the front of the
aluminum pack.
Attention
Do not throw away the box or the
packing material. They will be
reused to pack the used print
unit.
10
Open the square opening in the
print unit disposal bag.
11
While supporting the opening from
the bottom with your left hand, insert
the end of the opening into the print
unit compartment. Then, push the
opening into the printer.