Agilent Technologies E8257D/67D - Manual (Page 8)

4 Chapter 2
Getting Started
Checking the Shipment
Checking the Shipment
1. Inspect the shipping container for damage.
Signs of damage may include a dented or torn shipping container or cushioning material that shows signs
of unusual stress or compacting.
2. Carefully remove the contents from the shipping container and verify that your order is complete.
The following items are shipped standard with each signal generator:
• installation guide
• documentation CD-ROM
CD-ROM contents are also available in hard copy format. Refer to
“E8257D/67D PSG Documentation” on page 13 for more information.
• three-prong ac power cord specific to geographic location
3. Verify that any options ordered are included with the shipment by checking the packing literature
included with the shipment.
NOTE
The serial number label on the signal generator only lists the hardware/firmware options.
The packing literature verifies all items shipped.
Front handles and rack mounting hardware are also available for your signal generator. Refer to “Front
Handles and Rack Mount Flanges” on page 13 for more information.
4. Adapters shipped by Option are shown in the following table.
Table 2-1
Adapters Shipped by Option
Option Description Quantity Part Number
520 Connector Assembly 3.5mm F-F 1 5065–5311
520 1ED Adapter 3.5mm Type N (male) 1 1250–1744
532
540
544
550 Adapter – COAX STR F 2.4mm 1 1250–2187
Adapter 2.4mm (Female–Female) 1 33311–82005
567 Adapter 1.85mm (Female–Female) 1 85058–60114