AEG L61271WDBI - Manual (Page 33)

Preparation and assembly of the door
• The machine is originally pre-arranged
for the assembly of a door opening
from right to left (Fig. 2).
Fig. 2
Ø 35 mm
14 mm
16-22 mm
22±1,5 mm
416
mm
X
595-598 mm
• Door
The dimensions of the door should be:
– width 595-598 mm
– thickness 16-22 mm
– the height X depends on the height
of the adjacent furniture's base (Fig.
3).
Fig. 3
1
2
• Hinges
To mount the hinges it is necessary to
drill two holes (dia. 35 mm, depth
12.5-14 mm depending on the depth
of door furniture) on the inner side of
the door. The distance between the
holes hobs fixing centres must be 416
mm.
The distance from upper edge of the
door to the centre of the hole de-
pends on the adjacent furniture's di-
mensions.
The hinges will be fixed to the door by
means of screws for wood 1 and 2
(Fig. 4) supplied with the appliance.
Fig. 4
ENGLISH
33