AEG L61271WDBI - Manual (Page 34)

B
A
• Mounting the door
Fix the hinges to the appliance by
means of the M5x15 screws . The hing-
es can be adjusted to compensate for
possible uneven thickness of the door.
To align the door perfectly it is neces-
sary to loosen the screw , adjust the
door and tighten the screw A again
(Fig. 5).
Do not remove the screw B (Fig.
5.
Fig. 5
A
B
C
• Counter-magnet
The appliance is prearranged for a
magnetic closure of the door. To ena-
ble a correct operation of this device,
it is necessary to screw the counter-
magnet A (steel disk + rubber ring) in-
to the inner side of the door.
Its position must correspond to the
magnet B on the appliance (Fig. 6).
Do not remove the screw C.
Fig. 6
A
B
C
E
D
If the door has to be opened from left to
right, invert the position of the plates E ,
the magnet D and the plate C. Mount
the counter-magnet D and the hinges A
as previously described (Fig. 7 )
CAUTION!
Do not remove the screw B.
Fig. 7
15. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
34 www.aeg.com