AEG BS7304021M - Manual (Page 28)

• If you cannot find the settings for a
special recipe, look for the one that is
almost the same.
• You can extend baking times by 10 –
15 minutes if you bake cakes on more
than one shelf position.
• Cakes and pastries at different
heights do not always brown equally
at first. If this occurs, do not change
the temperature setting. The
differences equalize during the
baking procedure.
• With longer baking times, you can
deactivate the oven approximately 10
minutes before the end of the baking
time and then use the residual heat.
When you cook frozen food, the trays in
the oven can twist during baking. When
the trays become cold again, the
distortions are gone.
11.10 Tips on baking
Baking results Possible cause Remedy
The bottom of the cake is
not browned sufficiently. The shelf position is incor-
rect. Put the cake on a lower
shelf.
The cake sinks and becomes
soggy, lumpy or streaky. The oven temperature is too
high. The next time you bake, set
a slightly lower oven temper-
ature.
The cake sinks and becomes
soggy, lumpy or streaky. The baking time is too short. Set a longer baking time.
You cannot decrease bak-
ing times by setting higher
temperatures.
The cake sinks and becomes
soggy, lumpy or streaky. There is too much liquid in
the mixture. Use less liquid. Be careful
with mixing times, especially
if you use a mixing machine.
The cake is too dry. The oven temperature is too
low. The next time you bake, set
a higher oven temperature.
The cake is too dry. The baking time is too long. The next time you bake, set
a shorter baking time.
The cake browns unevenly. The oven temperature is too
high and the baking time is
too short. Set a lower oven tempera-
ture and a longer baking
time.
The cake browns unevenly. The mixture is unevenly dis-
tributed. Spread the mixture evenly
on the baking tray.
The cake is not ready in the
baking time given. The oven temperature is too
low. The next time you bake, set
a slightly higher oven tem-
perature.
www.aeg.com 28