Olympus PT-014 - Manual (Page 7)

● Do not perform operations other than specified in this instruction manual,
do not remove or modify parts other than specified, and do not use parts
other than specified.
Any troubles in taking pictures or with the equipment resulting from the
above actions shall be outside the guarantee.
● Our company shall be in no way responsible for accidents involving
immersion of a digital camera in water.
● Our company shall not pay any compensation for accidents (injury or
material damage) at the time of use.
● When the enclosure of the balance weight breaks, the metal on the inside
may corrode. Take care not to damage the enclosure.
● After use, wash the balance weight with pure water and wipe off all
moisture sufficiently.
● Do not use the following chemicals for cleaning, corrosion prevention,
prevention of fogging, repair or other purposes. When these are used for
the Case directly or indirectly (with the chemicals in vaporized state), they
may cause cracking under high pressure or other problems.
Chemicals which cannot be used Explanation
Volatile organic solvents,
chemical detergents
Do not clean the Case with alcohol, gasoline, thinner
or other volatile organic solvents or with chemical
detergents etc. Pure water or lukewarm water is
sufficient.
Anticorrosion agent
Do not use anticorrosion agents. The metal parts use
stainless steel or brass, and washing with pure water
is sufficient.
Commercial defogging
agents Do not use commercial defogging agents. Always
use the specified desiccant silica gel.
Grease other than specified
silicone grease
Use only the specified silicone grease for the silicone
O-ring, as otherwise the O-ring surface may
deteriorate and water leakage may be caused.
Adhesive
Do not use adhesive for repairs or other purposes.
When repair is required, please contact a dealer or a
service station of our company.
E-6