Charging battery pack – Olympus DS-5000 User Manual

Page 17

Advertising
background image

17

1

Char

ging Batter

y P

a

c

k

Charging Battery Pack

Directly Charging Through the
Recorder

The Ni-MH Rechargeable Battery Pack in the
recorder can be charged by connecting an AC
adapter or USB cable to the recorder.

Charging using AC Adapter (no cradle)

Connect the AC adapter to the recorder.

For connection procedures, see P.19.
When using the adapter for charging, connect the
power plug to the cradle AC connector.

Charging using the USB cable (no cradle)

Connect a USB cable to the recorder while
its

POWER switch is turned OFF.

When the recorder is connected to a USB cable while
its POWER switch is turned OFF, only charging will
be performed, and the computer will not recognize it
as a drive.

Notes

• Charge the battery pack often for first few uses. Battery

pack performs better after several full charge/discharge
cycles.

• Battery packs other than the supplied battery pack

cannot be charged.

• If you charge the battery pack right after charging is

complete, it will take only few minutes to charge the
battery pack.

• The PC must be ON when charging battery pack via

the USB cable connection.

• Charging battery pack via the USB cable connection

may not be successful depending on the power supply
capacity of your PC. Use the AC adapter instead.

• Do not set or remove the recorder from the cradle while

it is in operation.

• Do not charge the recorder with the USB hub connected.

• Do not attach or remove the rechargeable battery pack

if the AC adapter or USB cable is connected.

Advertising
This manual is related to the following products: