Olympus DS-5000 - Manual (Page 19)

19
1
Using the AC Adapter
Using the A
C
Adapter
Use the AC adapter (Olympus Model A513,
included) in cases where battery
consumption is a concern, such as when
recording for extended periods of time.
Plug the AC adapter (Olympus Model A513
included) into a household power outlet and
connect the power plug to the recorder’s
power connector (DC 5V). Always turn off
the recorder before you connect power.
Refer to P.16-P.17 regarding supplying
power to the recorder and cradle with the
aim of charging the Ni-MH Rechargeable
Battery Pack (
☞ P.14).
If the recorder detects a DC power
voltage outside of the allowable voltage
(allowable voltage: 4.6 to 5.5 V), then
[Power Supply Error Remove Power
Plug] will appear on the display and all
operations will stop. The recorder will
not be operable while abnormal voltage
is detected. Use the included AC
adapter (A513).
Detecting abnormal voltage
AC
connector
The plug type varies
depending on the country
where sold.
AC adapter
AC cable
Power Supply
Error
Remove
Power Plug
Warning
• Always stop recording before
connecting or disconnecting
power.
• When the AC adapter is not in use,
disconnect the power supply plug
from the power outlet.
• Use only the correct power supply
voltage as indicated on the
adapter.
• Do not use the AC adapter when
connecting the recorder to the
USB port.