Olympus DS-5000 - Manual (Page 20)

20
1
Turning ON the
Recorder
With the battery charged in the recorder and
the card inserted properly, the recorder is ready
to work.
While the POWER switch on the side of the
recorder is in the OFF position, none of the
buttons or switch on the recorder will be active.
Slide the power switch to the ON position to
activate the recorder.
Power Save Mode
When the recorder is ON but not in use for 10
minutes, by default, it will switch to power save
mode automatically. To reactivate the recorder
again, operate any button or the slide switch.
You can set the time to enter Power Save
mode from among [5 min.], [10 min.], [30
min.], [1 hour], and [Off] .
To exit power save, press any button.
The [Power Save] setting can be changed
from the Menu. For more details, refer to
“Menu List” (
☞ P.35) and “Learning to Use
the Menu” ( ☞ P.39).
Power Save Setting (Power Save)
T
urning ON the Recor
der/P
o
wer Sa
ve Mode
BACK EXIT
Power Save
5min.
30min.
1hour
Off
10min.