Olympus DS-5000 - Manual (Page 26)

26
2
Recording
1
Recor
ding
New Recording
Create a new file to record in.
1 Press the NEW button to create a new
file.
When [The Worktype List is displayed when a
new file is created] is set in DSS Player
(
☞ P.55) you can select the Work Type from the
Work Type list.
aSelected Author ID
bNew file number
cRemaining recording time
2 Move the slide switch to the REC
position to start recording.
The record/play indicator light glows red.
Aim the microphone at the sound source.
When you press the F2 (DISPLY) button
during recording, you can change the LCD
screen displays.
3 Move the slide switch to the STOP
position to stop recording.
If you want to append additional recordings to
the same file, move the slide switch to the REC
position again.
031
/ 031
VERBAL DISPLY INDEX
MIKE
QP DICT
E F
00
M
10
s
15 H 22 M 30 s
031
/ 030
FOLDER PRIOR INFO
MIKE
QP DICT
New File
E F
Remain
15
H
22
M
40
s
a
b
c
031
/ 031
FOLDER PRIOR INFO
MIKE
QP DICT
02
M
20
s
15 H 02 M 20 s
Notes
• A beep will sound when the remaining recording time reaches 60 seconds, 30
seconds, and 10 seconds while recording.
• When remaining recording time is less than 60 seconds, the record/play indicator
light starts flashing in red. When the recording time is decreasing to 30 or 10
seconds, the light flashes faster.
• [Memory Full] or [Folder Full] will be displayed when the memory or folder capacity
is full.
- Delete any unnecessary files before recording any further (
☞ P.31) or transfer
dictation files to your computer using DSS Player Software ( ☞ P.55).
- Change the recording destination at [Card select] setting ( ☞ P.24) or change to a
card with free space.
2
3
2