Olympus E-PM2 - Manual (Page 106)

106 EN
Interchangeable lenses
9
9
Choose a lens according to the scene and your creative intent. Use
lenses designed exclusively for the Micro Four Thirds system and
bearing the M.ZUIKO DIGITAL label or the symbol shown at right.
With an adapter, you can also use Four Thirds System and OM System
lenses.
# Cautions
• When you attach or remove the body cap and lens from the camera, keep the lens mount
on the camera pointed downward. This helps prevent dust and other foreign matter from
getting inside the camera.
• Do not remove the body cap or attach the lens in dusty places.
• Do not point the lens attached to the camera toward the sun. This may cause the camera
to malfunction or even ignite due to the magnifying effect of sunlight focusing through the
lens.
• Be careful not to lose the body cap and rear cap.
• Attach the body cap to the camera to prevent dust from getting inside when no lens is
attached.
M.ZUIKO DIGITAL lens specifi cations
 Names of parts
1 Front cap
2 Filter mount thread
3 Focus ring
4 Zoom ring (zoom lenses only)
5 Mount index
6 Rear cap
7 Electrical contacts
8 UNLOCK switch (only retractable
lenses)
9 Decoration ring (only some lenses,
remove when attaching a lens hood)
 Using power zoom lenses with macro functions
(ED12-50mm f3.5-6.3EZ)
Lens operation is determined by the position of the zoom ring.
While pressing
MACRO
+
Zoom ring MACRO button
Interchangeable lenses