V exp/ p /iso, Frequently-used options and customization – Olympus E-PM2 User Manual
Page 74
74 EN
Frequently-used options and customization
3
V Exp/p/ISO
Option
Description
g
EV Step
Choose the size of the increments used when selecting
shutter speed, aperture, exposure compensation, and other
exposure parameters.
—
Noise Reduct.
This function reduces the noise that is generated during
long exposures.
[Auto]: Noise reduction is only performed at slow shutter
speeds.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
• Noise reduction requires about twice the time needed to
record the image.
• Noise reduction turns off automatically during sequential
shooting.
• This function may not work effectively with some shooting
conditions or subjects.
27
Noise Filter
Choose the amount of noise reduction performed at high
ISO sensitivities.
—
ISO
Set ISO sensitivity. This is the same as the live control
setting.
55
ISO Step
Select the increments available for choosing ISO sensitivity.
—
ISO-Auto Set
Choose the upper limit and default value used for ISO
sensitivity when [Auto] is selected for ISO.
[High Limit]: Choose the upper limit for auto ISO sensitivity
selection.
[Default]: Choose the default value for auto ISO sensitivity
selection.
—
ISO-Auto
Choose the shooting modes in which [Auto] ISO sensitivity
is available.
[P/A/S]: Auto ISO sensitivity selection is available in all
modes except M. ISO sensitivity is fi xed at ISO200 in mode
M.
[All]: Auto ISO sensitivity selection is available in all modes.
—
Metering
Choose a metering mode according to the scene.
53
AEL Metering
Choose the metering method used for AE lock (P. 78). [Auto]:
Use the currently selected metering method.
—
BULB/TIME Timer Choose the maximum exposure for bulb and time
photography.
—
Live BULB
Choose the display interval during shooting. Some
restrictions apply. The frequency drops at high ISO
sensitivities. Choose [Off] to disable the display. Tap the
monitor or press the shutter button halfway to refresh the
display.
—
Live TIME
—
Anti-Shock z
Choose the delay between the shutter button being
pressed and the shutter being released. This diminishes
camera shake caused by vibrations. This feature is
useful in situations such as microscope photography and
astrophotography. It is also useful for sequential shooting
(P. 35) and self timer photography (P. 35).
—
MENU
c
V