Basic operations, 30 en, Select scn as the shooting mode – Olympus E-PM2 User Manual
Page 30: Select [panorama] and press q, Use fghi to choose a pan direction, Take a picture, using the guides to frame the shot
30 EN
Basic operations
2
Taking panoramas
If you have installed the supplied computer software, you can use it to join pictures together
to form a panorama.
g “Connecting the camera to a computer” (P. 95)
1
Select
SCN as the shooting mode.
P
A
S
M
A
SCN
ART
n
SETUP
2
Select [Panorama] and press
Q.
3
Use
FGHI to choose a pan direction.
4
Take a picture, using the guides to frame the shot.
• Focus, exposure, and other settings are fi xed at the
values for the fi rst shot.
250
250 F5.6
38
M
ISO
200
5
Take the remaining images, framing each shot so that the guides overlap with
the previous picture.
[ 2 ]
250
250 F5.6
38
M
ISO
200
[ 3 ]
Exit
Exit
• A panorama may include up to 10 images. A warning indicator (
g) is displayed after
the tenth shot.
6
After taking the last shot, press
Q to end the series.
#
Cautions
• During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
$
Notes
•
Pressing
Q before shooting the fi rst frame returns to the scene mode selection menu.
Pressing
Q in the midst of shooting ends the sequence of panorama shooting, and allows
you to continue with the next one.